Naslov (eng)

Modeling of the Mechanism of Action of Epilame Film in the Process of Processing

Autor

Zvyagina, Elena
Selemenev, Mikhail
Frolenkova, Larisa
Kravchenko, Igor
Kuznetsov, Yury
Velichko, Sergey
Aleksandar, Ašonja
Kalashnikova, Larisa

Opis (eng)

Abstract: The article discusses the mechanism of action of the epilam film during the operation of epilated drills and the influence of cutting conditions, processing conditions on their condition. Tribological tests were carried out using a special installation, where the test conditions are close to the conditions characteristic of the drilling process. Based on the results of the experiment, it was found that the effectiveness of epilam film directly depends on the cutting speed, which determines the temperature in the contact zone. Research has shown that use of oil-based LCTF MR-7 (МР-7) has the best effect on the state of epilam coating.

Jezik

engleski

Datum

2022

Licenca

Ovo delo je licencirano pod uslovima licence
Creative Commons CC BY 4.0 - Creative Commons Autorstvo 4.0 International License.

http://creativecommons.org/licenses/by/4.0/legalcode

Predmet

Keywords: Friction coefficient, cutting lubricant, temperature, tribological tests, epilam films

Deo kolekcije (1)

o:1600

Radovi profesora i saradnika Fakulteta za ekonomiju i inženjerski menadžment